Do It Yourself Installation


The Pepwave Surf On The Go can be placed in/on a window where the signal is strong and will then boost the signal inside, ensuring plenty of coverage for all your devices.


In addition to a wireless boost, it provides a single Ethernet connection that allows you to plug in one hardwired device as well.  An inexpensive Ethernet switch, would  allow you to connect more than one hardwired device.


It works well, and does boost the wireless signal, because it is a repeater device there will be likely be a slight sacrifice in wireless speed. However most users do not notice much difference. The Ethernet jack speed is not affected.


This is a do it yourself installation and is very simple to program via your web browser and laptop using an Ethernet cable. After programming, the Ethernet cable is not required but may be used for hardwire connection and better speed.


NEW:  If you also have a cellular USB modem, most of them can also be plugged in to the Surf On The Go and will create a cellular hotspot for all of your devices for when you are away from the dock. It is not an automatic switchover, but you can issue the command from your wired/wireless device.


This device is sold (and supported by) The 3G Store  at   866-347-8673

The regular price of the unit is $119.00, but The 3G Store gives Brightlan’s customers a discount that lowers the price to $107.00,  Shipping is $4.99

To purchase (and get the discount), you MUST use this link.



For a quick start guide, see this link.  Choose section B: WiFi Mode.



! Although this is the only extender device that we know works on our networks, we now warn that due to growing interference from other WiFi devices, we do not imply that you will get flawless performance or full Internet speed. We highly recommend using our Direct Connect device instead


The Pepwave Surf On The Go is sold (and supported by) The 3G Store  at   866-347-8673

Brightlan does not provide support on this device






Sometimes, users of a wireless network don’t get a strong enough signal to & from the network. This is usually because your computer or other device can’t always be located in the place with the most Signal.  There is a device you can use to improve your wireless reception from our network.


In addition, the unit will allow you to use multiple wired or wireless devices and in some cases, allows devices to bypass the login screen.  It creates a LAN so that devices like wireless printers, Chromecast, etc can communicate with each other and to your computer properly.


Pepwave Repeater/Extender/Booster


Wireless extenders/repeaters are subject to interference from other WiFi devices.  They also CREATE WiFi interference.  We warn that due to growing interference from other WiFi devices, it is certain that you will not get flawless performance or full Internet speed. You may also interfere with your neighbors service and may have to adjust its operation.


This is the only extender device that we know works on our networks and know how to answer questions on.  


We want you to have the best WiFi experience and you should not use any WiFi booster, extender, or repeater except as a last resort.


We highly recommend using our Direct Connect device instead.


By using this device you accept that you will not have an optimal experience and that Brightlan cannot do anything to improve the performance of this device.